Bitcoin Mining Software for Ubuntu

Aeon

Aeon (AEON) is a private, secure, untraceable currency. You are your bank, you control your funds, and nobody can trace your transfers.
[link]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Elicoin specifications

Elicoin is a CPU mineable cryptocurrency. It can be mined on GPU too, but CPU mining is more efficient.
Coin specifications: Coin name: Elicoin (ELI) Algorithm: YescryptR16 (CPU only) Total number of coins: 10 000 000 ELI Block time: 1 minute Block reward halving: every 500 000 blocks Maximum block size: 4 MB Initial block reward: 10 ELI Difficulty retarget: Every block (DarkGravityWave ver. 3) Premine: none
Wallet: Elicoin Core source codes Elicoin Core for Windows Elicoin Core for macOS Elicoin Core for Debian / Ubuntu Linux Elicoin Mobile Wallet for Android (on Google Play) Elicoin Mobile Wallet (Android GUI) - source codes Elicoin Mobile Wallet (Core C library) - source codes Elicoin Paper Wallet Generator
https://image.ibb.co/nMsmx8/Screenshot_20180628_004652_2.png
Mining: How to mine List of pools Elicoin GUI miner CPU miner Android miner Elicoin Linux
Community: Facebook Twitter Discord Telegram announcements Telegram chat Slack
Exchange: Crex24 - ELI / BTC BitexBay - ELI / BTC BarterDEX - Various pairs Multicoins - MC / ELI
Faucet: Faucet (3rd party - unofficial) How to use faucet How to install faucet script for Elicoin
Other: Elicoin website Block explorer Roadmap Elicoin price chart on CoinLib Elicoin price chart on Live Coin Watch Contact info and links
Please vote to get Elicoin on exchange: QuantaDEX (free votes) Vote on Altcoin.io (free votes) Vote on SouthXchange (paid votes) Vote on C-CEX (free and paid votes)
submitted by Elicoin to EliCoin [link] [comments]

Interested in Nerva but you have some questions? FAQ inside

Where can I download the Nerva wallet?
https://getnerva.org/#downloads
• Ubuntu o 16.04
o 17.10
o 18.014 • Fedora
o 27 o 28 o 29
• Windows o CLI o GUI
• Android o 4.4+
o 7.0+ Unoffical Mac Build: https://github.com/xmranon/Nerva/releases
How long does it take for my balance to unlock?
Your balance is unlocked after 20 confirmations(which means 20 mined blocks). A block is mined approximately every one minute on the Nerva network, so that would be around 20 minutes.
How can I prove that I sent a payment?
The fastest and most direct way is by using the Nerva-explorer https://explorer.getnerva.org/ . You will need to recover the transaction key from your wallet:
Check if your Nerva wallet is set to store transaction keys by using the command:
Set
If it comes back with a 0, then use the following command to tell it to keep the transactions keys
set store-tx-info 1
Query for your tx_key for a particular transaction
get_tx_key TXID
(plug in her actual transaction ID instead of this TXID placeholder)
How do I buy Nerva (XNV) with Bitcoin (BTC)?
https://tradeogre.com/exchange/BTC-XNV https://nerva.exchange/
How do I mine Nerva?
Once you have created a wallet and have your daemon running in either the CLI or GUI wallet
CLI: In the Wallet window input the following
start_mining [# of threads]
GUI:
Daemon->Toggle Miner: Turn the miner on/off.

Why I can't see my balance? Where is my XNV?
Before any action there are two things to check:
Are you using the latest available version of the wallet? Make sure you're using the current release (compare the release on GetNerva.org with your wallet's version)
Is your wallet fully synchronized? If it isn't, wait the sync to complete.
Because Nerva is Pool resistant, the wallet synchronization is not as fast as Monero or other CN coins. The software needs to synchronize the blockchain and this can take somet time.
Daemon->Toggle Miner: Turn the miner on/off.
You can't send transactions and your balance might be wrong or unavailable if the wallet is not synced with the network. So please wait.
I don't want to download the blockchain, how can I skip that?
If you don’t wish to mine, you can use a public node by entering the following in your CLI wallet:
nerva-wallet-cli --daemon-address xnv.pubnodes.com:17566
submitted by xmranon to Nerva [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

Discord Log from Ravencoin Open Developer Meeting - Oct 19, 2018

RavencoinDev - Today at 2:03 PM
Hello Everybody, sorry we're getting started a couple of minutes late today.Today we wanted to make sure that everybody was aware of the Bug Bounty program and discuss it.Has everybody seen the information at https://github.com/RavenProject/Ravencoin/wiki?GitHubRavenProject/RavencoinProject staging tree. Contribute to RavenProject/Ravencoin development by creating an account on GitHub.📷

Hans_Schmidt - Today at 2:06 PM

Yes. I'm working on it...📷1

RavencoinDev - Today at 2:07 PM

I have seen that @Hans_Schmidt Thank you for really digging into the code. You have found some really good ones.Did you get an address posted in the issues so we can reward you for your efforts?

Hans_Schmidt - Today at 2:08 PM

Yes I sent it to Tron and blondfrogs. Thanks.

[Dev] Blondfrogs - Today at 2:08 PM

I got hans address, and updated the wiki accordingly

RavencoinDev - Today at 2:09 PM

Nice! thanks guys, we'll get that sent out today.

brianmct - Today at 2:09 PM

Wow that's a lot of RVN!

Hans_Schmidt - Today at 2:09 PM

The next one is proving harder to find. That is a good thing 📷

[Dev] Blondfrogs - Today at 2:09 PM

Please @Scotty and @Hans_Schmidt look at the wiki, and make sure the address next to the issues you created is the correct address where you would like payment.(edited)

MSFTserver-mine more @ MinerMore - Today at 2:09 PM

just a heads up im renaming this channel to just development meetings

RavencoinDev - Today at 2:09 PM

We feel it's worth the amount for sure to find and fix those type of issues.

brianmct - Today at 2:10 PM

Probably shouldn't keep the addresses on the wiki, since it's publicly editable?

RavencoinDev - Today at 2:10 PM

@MSFTserver-mine more @ MinerMore okay

[Dev] Blondfrogs - Today at 2:11 PM

We will look into the github wiki permissionsand verify addresses before sending payment

RavencoinDev - Today at 2:11 PM

Thats a good point, and reach out to the individuals directly to ensure it's their correct address.

brianmct - Today at 2:12 PM

Actually it's not publicly editable. My bad. Still good to confirm directly though

RavencoinDev - Today at 2:12 PM

Yes

brianmct - Today at 2:12 PM

Probably have people put their address on the issue when reporting it

[Dev] Blondfrogs - Today at 2:12 PM

^^

brianmct - Today at 2:12 PM

Don't want any MITM attacks :P

RavencoinDev - Today at 2:13 PM

No we don't.

Chatturga - Today at 2:13 PM

Putting a public address out there is asking to get sent certain asset tokens when it goes live. 📷📷1

RavencoinDev - Today at 2:13 PM

Any questions about the issues that were found thus far?

Hans_Schmidt - Today at 2:14 PM

I verified that my address is correct.

[Dev] Blondfrogs - Today at 2:14 PM

Thanks

Hans_Schmidt - Today at 2:15 PM

Will you send a dust send first to verify (for bitcoin we do that as standard procedure for large amounts)

[Dev] Blondfrogs - Today at 2:15 PM

Yes, that is the process we follow also

Hans_Schmidt - Today at 2:15 PM

sounds good

RavencoinDev - Today at 2:16 PM

Just an FYI some of the developers were at the Free State Blockchain conference last week.We also spoke at the MIT Business schoolIt was great to see our community members there!

UserJonPizza™FlyToTheNorthRaven - Today at 2:17 PM

Are you guys 100% on the 31st? Ik prob been asked a million times but...

RavencoinDev - Today at 2:18 PM

Thanks to all that helped with the conference.📷1

[Dev] Blondfrogs - Today at 2:18 PM

The current code base will start voting on the 31st.

Chatturga - Today at 2:18 PM

Yes Its in the code.

RavencoinDev - Today at 2:18 PM

Any other questions about the Bug Bounty?

Hans_Schmidt - Today at 2:19 PM

What's the plan for next formal release?

[Dev] Blondfrogs - Today at 2:20 PM

Should be early next week, we are planning a 2.1.1 release, with the latest bug fixes in it.We thought we would give it a couple more days to see if any additional bugs are found.

RavencoinDev - Today at 2:21 PM

Agreed, there will be one more binary release before the end of the month.

[Master] Roshii - Today at 2:21 PM

Sorry late again

Hans_Schmidt - Today at 2:21 PM

I'm not pushing for the release, just asking. I prefer to have a few days to see if I can get my next attack attempt to work

SpyderDev - Today at 2:22 PM

@[Master] Roshii - were your ears burning?

[Dev] Blondfrogs - Today at 2:22 PM

Yep. You got it, keep attacking the chain!

RavencoinDev - Today at 2:23 PM

Yes please we would encourage everybody to help us find additional chain splitting or consensus defects.Other defects are also welcome, just not part of the bounty at this point.

Hans_Schmidt - Today at 2:24 PM

It would be helpful to know if someone is methodically verifying that the fixes work and also cover the minor variations, because I am not doing that.

[Dev] Blondfrogs - Today at 2:25 PM

Yes. I am personally verifying all bug fixes, and so are the other developers

SpyderDev - Today at 2:25 PM

We are also creatimg tests for them.

Hans_Schmidt - Today at 2:25 PM

Like I payed unique asset creation into the wrong burn address. But there are other variations. Your fix looks like it covers it all.

[Dev] Blondfrogs - Today at 2:26 PM

That is correct. We appreciate the bugs found and expand off of them to fix all other small variations of them.

Hans_Schmidt - Today at 2:26 PM

Great. I focus on new angles.

[Dev] Blondfrogs - Today at 2:26 PM

Prefect!

SpyderDev - Today at 2:26 PM

Please

Chatturga - Today at 2:27 PM

test 

RavencoinDev - Today at 2:27 PM

@Tron isn't able to be here but he wanted me to share this.
Hi All. I’m sorry I’m not able to make it to this development discussion. I’ve been invited to be on a Cryptocurrency and ICO/STO panel at the Federal Bar Council Fall Retreat. I've been informed that many of the attendees are judges from the Second Circuit Court of Appeals which is the Circuit Court for the state of NY. These presidentially appointed judges are just below the US Supreme Court and before whom the SEC and CFTC would be mere litigants. I’m on the panel with some heavyweight crypto and securities attorneys and my role will be talking primarily about the technology (blockchain, tokenized assets, smart contracts, etc.) while allowing the other distinguished panelists to address the legal aspects of this new technology. This is an amazing opportunity to introduce the audience to the best aspects of crypto-currencies and crypto-assets. 
📷4

Pathfinder - Today at 2:28 PM

wow that's awesome

SpyderDev - Today at 2:28 PM

We are all hoping @Tron will not get arrested.

mapple - Today at 2:28 PM

yesand yes to the not arrested :))

RavencoinDev - Today at 2:29 PM

I told him the mask thing was probably a bad idea for that event...

Hans_Schmidt - Today at 2:29 PM

The Raven mask or the Guy Falkes?

RavencoinDev - Today at 2:29 PM

We need a Tron with judges Meme @PathfinderYes to both.

Skan - Today at 2:29 PM

ITS A TRAP

RavencoinDev - Today at 2:30 PM

LOL

Hans_Schmidt - Today at 2:30 PM

A Tron Trap?

mapple - Today at 2:30 PM

i was asked on telegram a few days ago about timeframes for all phases (currently announced) to be completed - are there estimates I've missed?I've properly looked through githubi've not lol

RavencoinDev - Today at 2:31 PM

We are hoping to complete the remaining phases by the end of Q1 but have provided no hard dates.

mapple - Today at 2:32 PM

OK - so march 2019 estimate if anyone asks again would be fair at the moment

RavencoinDev - Today at 2:33 PM

One of the topics I would like to cover for all our web developers is the ravencoin.com website.

gwrg - Today at 2:33 PM

Does it include Phase 7 which was added recently?

RavencoinDev - Today at 2:34 PM

That's not been fully thought through to this point so it's not likely.I wanted to make sure you all knew that Ravencoin.com is a community website, the source is posted and web developers are free to submit pull requests to make changes.

Vincent - Today at 2:35 PM

Chatturga had mentioned a plan to somehow modify the asset creation cost in the future...is that part of the qtr 1 plan?

RavencoinDev - Today at 2:36 PM

We'll be watching closely how the asset creation and RVN burn goes once it goes live.

Chatturga - Today at 2:37 PM

I did say that the rate is 500 RVN for now so that actual data can be gathered, which can then be applied to proposed changes. Speculative data just isnt enough.(edited)

RavencoinDev - Today at 2:37 PM

Anywho... The source for the Website is at https://github.com/RavenProject/ravenproject.github.ioGitHubRavenProject/ravenproject.github.ioRaven Project Website. Contribute to RavenProject/ravenproject.github.io development by creating an account on GitHub.📷

Pathfinder - Today at 2:37 PM

https://i.imgflip.com/2kieyw.jpg📷

SpyderDev - Today at 2:38 PM

LOL

Pathfinder - Today at 2:38 PM

Tron's in there. Just have to look hard (like finding Waldo)

RavencoinDev - Today at 2:38 PM

@Pathfinder You are the best, I'm just saying....

Vincent - Today at 2:38 PM

i understand but pure economics will go into play. i will not harp on it here...there is plenty of time for this

Skan - Today at 2:38 PM

Ok good to know @ website, will spread that info

Vincent - Today at 2:38 PM

obvious my soapbox

RavencoinDev - Today at 2:39 PM

Thanks Skan!📷1Any questions about Ravencoin.com?

Hans_Schmidt - Today at 2:40 PM

I come to these meetings for @Pathfinder memes(edited)

RavencoinDev - Today at 2:40 PM

SO DO I!If I say no will you delete your post?(edited)📷Actually, if we don't have any further questions about the website that would be a great topic.

[Dev] Blondfrogs - Today at 2:43 PM

1

RavencoinDev - Today at 2:43 PM

@[Master] Roshii has been hard at work adding asset support to the mobile wallets.📷3You'll be able to see, transfer, receive assets.You'll also be able to create them right on your phone.

mapple - Today at 2:44 PM

awesome for small business use cases

Vincent - Today at 2:45 PM

will that only include RVN created assets or other currencies as well?

RavencoinDev - Today at 2:46 PM

The RVN wallets only support RVN and soon will support RVN assets.📷2Agreed!Any other questions about Mobile support?

russ - Today at 2:48 PM

any web wallets that support assets yet?

RavencoinDev - Today at 2:48 PM

That's a good question!

Chatturga - Today at 2:49 PM

@traysi -[MM Sysop]- Might be able to answer that.

Pathfinder - Today at 2:49 PM

https://i.imgflip.com/2kifzg.jpg📷

RavencoinDev - Today at 2:49 PM

That's amazing.I think Pathfinder could get paid to make memes for a company...@Under Has done some great work migrating web based bitcoin tools to Raven.I would love to see a web dev kit that allowed web/mobile developers to easily incorporate Raven into their projects.

SpyderDev - Today at 2:51 PM

When is the meme bounty program?

Hans_Schmidt - Today at 2:51 PM

Just wondering- is anyone tracking use of post-2.04 client use on the mainnet? It would be good to know if the non-asset stuff is continuing to work without issues on main.

[Master] Roshii - Today at 2:52 PM

@RavencoinDev I have some ideas for mobile integration kit

[Dev] Blondfrogs - Today at 2:52 PM

Everything seems to be in order on Mainnet.

RavencoinDev - Today at 2:52 PM

Awesome @[Master] RoshiiLet's open it up for General Q&A for the last 10 minutes. Anybody have a question they have been dying to ask?

Under - Today at 2:53 PM

I’d really like to know about the build system.The solution I use is pretty reliable.

cade - Today at 2:53 PM

What would you like to know about it?

Under - Today at 2:54 PM

I’d be glad to train you up on mine

RavencoinDev - Today at 2:54 PM

We are working to incorporate the work that you have put in there. Still struggling with the Mac build part of it.

Hans_Schmidt - Today at 2:54 PM

Do you track wallet version usage on main. Any idea how many people are using newer versions?

cade - Today at 2:54 PM

The current build system we're using is based on what you've doneJust modified to fit into our CI process

[Dev] Blondfrogs - Today at 2:55 PM

@Hans_Schmidt We don't have a rolling tally but you can use the explores to view node versions.

RavencoinDev - Today at 2:55 PM

We do check what's being run on the network periodically but don't have a dashboard type view into the version data.

Vincent - Today at 2:55 PM

is the burn rate going to be tracked and charted on the asset explorer?

Under - Today at 2:55 PM

Rather than incorporating it, it vanilla in a vanilla Ubuntu 18 box works pretty well. CI like Travis could run on a fully gitian build, which I’m glad to work on too

RavencoinDev - Today at 2:56 PM

@Vincent There was talk of creating an RPC call that would show how much has been burned and for what purpose.Anybody want to take a shot at writing that?

Under - Today at 2:56 PM

I’m in the process !Lol

Vincent - Today at 2:56 PM

be a great stat to watch

russ - Today at 2:56 PM

http://ravencoin.asset-explorer.net/stats @Vincentburn and creation rate

Vincent - Today at 2:56 PM

nice

RavencoinDev - Today at 2:57 PM

Sweet, thanks @russ

russ - Today at 2:57 PM

@Scotty made it📷1top notch

cade - Today at 2:58 PM

@Under We have processes and tools that are in use within our organization and we leverage those tools for all of our projects. We have taken the awesome work you've done and tailored it to fit within our toolsets.📷2

Under - Today at 2:59 PM

I can understand that, but I’d counter that the process I describe is simply a copy of bitcoins and allows for it to be replicated in a larger community of developer outside of the Medici teamIt makes the build process trustless and decentralized if it can be replicated by anyone.But I get why you have your ways of doing it.

Hans_Schmidt - Today at 3:00 PM

If you drop the burn address into the web explorer, it tells you how much went there.

Vincent - Today at 3:00 PM

charts are nicer📷2📷1

RavencoinDev - Today at 3:01 PM

I would like a burned endpoint that coinmarketcap can easily call to use in their circulating supply metric.

Vincent - Today at 3:01 PM

burn and rewards can only go one way.... 📷

RavencoinDev - Today at 3:02 PM

Alright, thank you all for being here today. Thank you for your support and for all your effort on Ravencoin platform!

Neo-Geo - Today at 3:02 PM

While we are aware of the dev team’s commitment to ASIC resistance, are there any assurances that RVN dev will find a solution to stay GPU exclusive for optimal decentralization? Monero’s commitment to fork every 6 months (currently on CryptoNightV8) has been wildly successful in keeping AMD’s cards pointing predominantly at their network. RVN is quickly replacing Ethereum as the defacto coin to mine for Nvidia owners (the world’s most popular video card), but the rise of FPGAs can ruin the incentive for GPU miners and lead to hash centralization.📷2

Vincent - Today at 3:02 PM

as a noob...glad to be part of this...great job by all

cade - Today at 3:03 PM

@Under We will be releasing our build process to the community

RavencoinDev - Today at 3:03 PM

Yes @Neo-Geo we are committed to ASIC resistance and we are watching Monero closely.Thanks again everybody. Now go find some BUGS!

Under - Today at 3:04 PM

Cool thanks guys

[Dev] Blondfrogs - Today at 3:04 PM

BTW. QT wallet GUI update is coming. hahahah. have a good day everyone📷1

russ - Today at 3:05 PM

📷

mxL86 (MinerMore.com) - Today at 3:05 PM

Noicee

Hans_Schmidt - Today at 3:05 PM

CU later

Pathfinder - Today at 3:05 PM

thank you everyone!
submitted by Chatturga to Ravencoin [link] [comments]

Interested in contributing to the BTC network? Here is the steps to get a full node up and running in Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to Bitcoin [link] [comments]

BitcoinCore to BitcoinUnlimited decision

Dear CryptoCurrency community
After long fought indecision, I have finally decided to drop my support for Core.
Because I am worried about the following:
Taking the lessons from history for one, regarding how an idea always starts off in good intentions, but becomes corruptible in the end, the very words “all transactions are processed by a trusted third party, without having to broadcast them across the entire network”. (With that statement, it tells me its just going to go the way of the similarities with our traditional banking system!).
Don't get me wrong, I know there is no clear answer, as there are problems with BU as well, but I prefer the risk centralized mining any day (the two of greater evils) over a centralized company, processing transactions, off chain!. As this begs the question for new comers why bother with Bitcoin if Bitcoins transactions are being processed by a third party, isn't that just like what we have already with banking!. (The whole point of Bitcoin is NO trust is required and people processes and validate there own transactions e.g. ‘full’ nodes).
Remember: Satoshi Nakamoto has been nominated a noble prize for economics, thats for a good reason. (Going with CoreDev goes well away from his vision).
SegWit is one step to the next and so on, i.e. because SegWit ‘Modifies’ the block structure, that is dangerous in my opinion as the next steps can be manipulation of Bitcoin, especially with “third party trust” this is in favor of Gov and NSA control, Its now possible at that stage for Gov/NSA to implant monitoring code within blocks to have all Bitcoin users transactions monitored by the NSA, at that point nobody can do anything. (If SegWit gets its way, I can bet that Gov and NSA will actually start encouraging people to switch to Bitcoin as a means of mass surveillance!).
https://cointelegraph.com/explained/segwit-explained https://medium.com/@jonaldfyookball/an-open-letter-to-bitcoin-miners-c260467e1f0 https://falkvinge.net/2017/05/01/blockstream-patents-segwit-makes-pieces-fall-place/ http://www.businessinsider.com/bitcoin-inventor-satoshi-nakamoto-nominated-nobel-prize-economics-bhagwan-chodry-2015-11?r=UK&IR=T&IR=T https://www.eff.org/deeplinks/2016/07/blockstream-commits-patent-nonaggression
I really WANT to be completely WRONG on everything I said, but my gut is telling me I’m right!. So please do correct me the best you can! :D.
Personally I find BU much better, because I can actually 'map port' through the GUI (Cant do that with core, at least on Ubuntu, have to port forward!), You can set Bandwidth limits and set block sizes, You cant do that at all with Bitcoin Core! (I know you can set Bandwidth limits at least with Core, but is command based, NOT GUI and NOT user friendly for new comer!). (In my opinion if you run a wallet especially a 'full' node you should have more easier control over it!; BU is much better I find). The idea that its very buggy is more myth as its code is copied form Core and new code with BU developers aka copyright CoreDevs and BU Devs shown on startup of BU. I have had NO problems at all with BU.
Regards.
submitted by TXJQQVRF to CryptoCurrency [link] [comments]

Mining

Mining Bitcoin, Dash, Ether, Zec....☆ These 5 companies below pay me regularly for 1 year
  1. Hashfare: http://bit.ly/291m6h8
  2. Genesis: http://bit.ly/2c6NLNI
  3. Eobot , Cryptocoin mining. Mining contract for 5 years. + Claim free cryptocoin: http://bit.ly/2bSw9F2
  4. Hashing24 ,Start Bitcoin Mining with Maximum Efficiency: http://bit.ly/2ly51Q2
  5. Minergate , Cryptocurrency GUI miner and Mining Pool. Easy Software for Windows, Ubuntu, Fedora, Android and Mac: Mining Ethereum, Bitcoin, Litecoin, Bytecoin, Monero, DigitalNote, FantomCoin, QuazarCoin mining pool: http://bit.ly/29Pz1ps

☆New ☆ Be careful with the new ones you never know !! The rule in Cryptocoin is to invest only those you can afford to lose:
  1. 5 Star Mining - Cloud Mining. Every new user who registers in the first 3 months get 200 GH / s for free! Reinvestment and sponsorship: http://bit.ly/2zVFLdu
  2. Just-mining: http://bit.ly/2iDITEe
  3. Bitcoinvest , Bitcoin Cloud Mining - Cryptocurrency Investment: http://bit.ly/2yniNOd
  4. TELCOMINER , Register a bonus of 15 KH / s for 30 days. If you make a deposit within 30 days the bonus stays eternal. The daily profit is equal to 1.09% of the investment. Minimum withdrawal amount - 0.005 BTC. Automatic payments every day. their equipment is dispatched in 5 centers all over the world: http://bit.ly/2yQtkTv
submitted by riricoin to u/riricoin [link] [comments]

To help you get started on bitcoins...

Sup fellow reddit members!
Today I'm here to give you guys a long introduction about bitcoins.
Intro to bitcoins:
Bitcoins are the first decentralized digital currency.
Bitcoins are basically digital coins that you can send through the internet.
Some advantages of bitcoins:
  1. It can be transfered through other people without a bank having involved in the transaction.
  2. The transaction fees are much lower.
  3. You can use them in any and every country.
  4. Your account (explained later) can never be frozen.
  5. No limits!
How it works:
There are several online bitcoin currency exchange where you can exchange bitcoins for money and vice versa.
Bitcoins are kept in a digital wallet on your computemobile device. coinbase.com is one of the most trustworthy online bitcoin wallet, IMO.
Sending bitcoins is as simple as sending an email, and you can purchase ANYTHING with bitcoins as long as they accept the currency.
The bitcoin software is completely open-sourced, so anyone can review the code.
Bitcoins are easy + free to setup, and there are no chargebacks!
How to obtain bitcoins:
There are two ways to obtain bitcoins:
  1. Buying them from exchanges/privately. The one that I trust the most is http://www.bitstamp.net.
  2. Mining them using applications. Miners solve math problems/bitcoin algorithms (which takes computing power) and are rewarded bitcoins for doing that. This is the one that I'm going to focus on, as it is pretty hard to grasp.
Mining bitcoins:
Using special software application, you are able to mine bitcoins. Mining means to solve math problems/bitcoin algorithms using your computing power.
Blocks are a chunk of 25 bitcoins, and if you solve one math problem you automatically get a block.
The speed of mining bitcoins is measured in Hashes/Second (KH/s, MH/s, GH/s, TH/s etc.)
The difficulty of the problems gradually increases as more bitcoins are found. Now, it is almost impossible to find bitcoin blocks by yourself, as more than 10 million bitcoins have been mined.
Using special hardware (ASIC, Application-Specific Integrated Circuit chips) that specifically is aimed to mine bitcoins increases your mining speed by a lot. You can buy these hardware anywhere online/offline. amazon.com has many ASIC hardware on sale.
But even ASIC mining can still take a long time to find a block by yourself. That's how the pooled mining began.
Pooled mining basically combines the work of many miners toward a common goal. Pool of miners find the solution of the math problems faster than individuals, and they share the block equally based on each miner's hash rate.
There are many pools right now that are pretty trustworthy, but that one that I use is triple mining: http://evilbeans124.triplemining.com
Mining bitcoins on a Mac:
This part is only dedicated on mining bitcoins for Mac users. If you're a PC user or a Linux/Ubuntu user, skip this.
  1. Go to asteroidapp.com and download the latest version of Asteroid
  2. Open Asteroid
  3. Under Mining Pool, select TripleMining
  4. Hide the application, go to whatever browser you use, and go to http://evilbeans124.triplemining.com
  5. Register for an account
  6. Under the workers tab, add a new worker (on the right side)
  7. Go back to Asteroid, and fill in your worker username + password.
  8. Start mining
  9. You're done
Mining bitcoins on a PC:
This part is only dedicated on mining bitcoins for PC users. If you're a Mac user, view above. If you're a Linux/Ubuntu user, skip this.
  1. Go to https://bitcointalk.org/?topic=3878.0 and download the latest version of GUI miner
  2. Open GUI miner
  3. Select Triplemining for the server
  4. Hide the application, go to whatever browser you use, and go to http://evilbeans124.triplemining.com
  5. Register for an account
  6. Under the workers tab, add a new worker (on the right side)
  7. Go back to GUI miner, enter in your worker username/password
  8. If you have any hardware, then select them in the device tab. If not, skip this step
  9. Start mining
  10. You're done
Mining bitcoins on a Ubuntu/Linux:
This part is only dedicated on mining bitcoins for Linux/Ubuntu users. If you're a Mac or PC user, view above.
Unfortunately, I have no experience in how to install any miner on Linux. The following website does however, so just follow it
http://www.distrogeeks.com/install-cgminer-3-7-2-ubuntu/
The end
I think I covered most of the points on bitcoins. However, if there is any mistakes/stuff that I should add, please put a comment below or PM me! It will be greatly valued!
I spent sometime doing this, so some donation will be very appreciated. My bitcoin address is on my signature.
Credits to bitcoin.com, bitcoinmining.com, triplemining.com/help, http://www.distrogeeks.com/install-cgminer-3-7-2-ubuntu/
Helpful? Considering mining in my pool: http://evilbeans124.triplemining.com (PM me if you STILL don't know how to mine bitcoins) Tip me at: http://evilbeans124.tip.me
submitted by evilbeans124 to Bitcoin [link] [comments]

GUI Scrypt Mining Software in Ubuntu?

Does anyone have all the terminal commands for installing a GUI scrypt miner via repositories in Ubuntu? Does such a thing exist? What's the best online wallet for Litecoin? I'm building a very basic OpenCL miner, and my components are coming in the mail. I already mine bitcoin, but my mining software is in java, it's GUI, and it "just works."
submitted by Marco_X to litecoin [link] [comments]

Interested in contributing to the BTC community? Here is a exhaustive manual to get you up and running. (Only takes about 20-30 minutes if you are fluent in command prompt on linux).

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to rBitcoin [link] [comments]

Running a full node using Bitcoin-daemon. Instructions for Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to BTC_Reviews [link] [comments]

minar bitcoin con nicehash en ubuntu The Great Bitcoin Miner Pro 2020 Without Any Withdrawal Fee Best Bitcoin Mining Software 2020� Bitcoin Mining on Ubuntu Bitcoin Mining on Ubuntu 18.10 - Bitcoin Mining Software 2019 How to mine bitcoins with GUI miner!

Ubuntu Bitcoin Miner Gui Generate Ethereum Paper Wallet Welche Kryptowährung Als Zahlungsmittel. Reduce Traffic Some node operators Bitcoin Anonym Erwerben need to deal with bandwidth caps imposed by their ISPs. Natural Gas Spot Price Today Since it is designed for use with its own pool, 4. EasyMiner. EasyMiner is a GUI based software and it acts as a convenient wrapper for CGMiner and BFGMiner software.. EasyMiner can be used for solo mining, CPU mining, cuda mining, pool mining etc and it supports the stratum and getwork mining protocols. When available, it automatically uses AVX, AVX2, and SSE2. 5. BitMinter. BitMinter is a mining pool that wants bitcoin mining to be easy What is BFG Miner? As stated above, BFG Miner is a bitcoin miner which has the ability to mine bitcoins on a range of devices from ASIC, to FPGA, to GPU, to obsolete CPU systems. As the operating systems, it supports again a range of systems from Arch, to Debian, to Gentoo, to OpenWrt, to Ubuntu. This article focuses on Ubuntu only, but the I’m a below average user of Ubuntu who used it once per year on average for the last 15 years. Yet, I’ve pulled this pretty easily since this is really basic stuff for Ubuntu users. All in all, I can just say- a GUI Bitcoin miner for Linux definitely exists, it’s really easy to setup and most importantly- works. Bitcoin Miner For Ubuntu - Are also gui software available to mine ethereum such as minergate - Découvrez l’univers de Stellest - Art énergie renouvelable - Art solaire - Trans nature art - Artiste Stellest énergie renouvelable - Art cosmique - Nature Art stellest - Tête Solaire Stellest - Stellest

[index] [18811] [16579] [23989] [28883] [21410] [21975] [29491] [14907] [12050] [31062]

minar bitcoin con nicehash en ubuntu

Best BTC Miners in 2020: Bitcoin Miner Machine The State of Bitcoin Mining Best Bitcoin Miners CGMiner EasyMiner MultiMiner BFGMiner NiceHash GUI Miner DiabloMiner Miners for PC Mobile Miners for ... Best Bitcoin Mining Software Best BTC Miners in 2020: Bitcoin Miner Machine The State of Bitcoin Mining Best Bitcoin Miners CGMiner EasyMiner MultiMiner BFGMiner NiceHash GUI Miner DiabloMiner ... Bitcoin Mining on Ubuntu 18.10 - Bitcoin Mining Software 2019 - Duration: 24:00. Bitcoin Mining Software 2019 8,468 views. 24:00. Language: English Location: United States In this video, I'm going to show you how to start mining Bitcoin on Linux/Debian based operating systems. https://bitcoinminingsoftware2019.com... Start Mining Bitcoin In Under 5 Minutes On Any Computer!! Laptop Mining!! Mac Mining!! Honey Miner!! - Duration: 6:11. Bitcoin Tips 838 views

Flag Counter